First Aid Courses & More with Safety Now

Course Overview
Certified by the Canada Safety Council, we offer a seven-hour course to bring ATV riders up to speed on proper riding techniques, as well as practical exercises and scenarios. We will cover topics such as controls, reading terrain, turning, and climbing hills.

Who should take the ATV Rider Safety Course?

Any individual using an ATV for recreational or job-related activities.

What the ATV Rider Safety Course can do for You and Your Company

The ATV Rider Safety Course can help reduce the amount of accidents and injuries as a result of untrained operators. This course will provide the operator with the skills and knowledge to properly react to treacherous conditions and riding situations. Safety Now also provides guidelines on personal protection equipment standards.

$ 219.45 W, GST

UTV/ATV rentals available

$210.00 W/GST

$126 W, GST

$152.25 W, GST

$126.00 W, GST

Course Overview

This one-day program is intended for all workers in the petroleum industry who could be exposed to hydrogen sulphide (H2S). The primary focus is to provide generic H2S program content to help workers work safely in and around H2S environments. The program covers the physical properties and health hazards of H2S, how to protect oneself and basic rescue techniques. Each student is required to operate a self-contained breathing apparatus and to perform a rescue lift and drag exercises.

Additional Notes:

Appropriate clothing is required (i.e. jeans, pants).

Employers are advised not to send injured employees who are unable to perform the required exercises to pass the course (e.g., employees on Workers' Compensation or light duty).

$173.25 W, GST

$105 W, GST

Course Overview

The one day program will allow you to understand the use of fall protection, as it relates to the work you perform at height. Various fall protection options exist; this course will identify which options best meet your needs, and give you the tools and knowledge to work at height safely. The course material is energetically delivered over a full day, that includes hands-on activities, classroom learning, and focuses on student participation.

The course includes:

Fall accident statistics

Governing bodies and regulations

Dynamics of falling

Fall protection systems

Fall protection planning

Fall arrest system components

Clearance & free-fall calculations

Harness fitting

Equipment care and inspection

Suspension trauma

Rescue principles

$189 W, GST

$194.25 W, GST

$241.50 W, GST

Learning Objectives

The learning objectives of this Elevated Work Platform course are to ensure that students demonstrate an understanding of the following:

Legislation and Standards as they relate to Elevated Work Platforms

Employer and Worker Responsibilities

Elements of Pre-Work Planning

Load Limitations and Calculations

Stability

Pre-Use Check and Visual Inspection

Personal Protective Equipment Requirements

System Components

Working from Heights

Platform Types

Machine-Specific Features

Safe Operation

The Training and Competency Requirements

Rescue and Escape Planning

Recognition, Evaluation and Control of Hazards

$262.50 W,GST

Who Should Take this Course?

Every worker who is likely to enter a confined space or who performs related work.

Course Description

This confined space course is an effective way to keep you and your employees up-to-date with training requirements.

The course covers:

Confined space introduction and regulations

Hazards of a confined space

Test & certificate

Pre-entry requirements, including:

Confined space program

Hazard assessment and the entry plan

Training requirements and record keeping

Entering a confined space, including:

The entry permit and onsite rescue

Energy / Materials Isolation & Control

Atmospheric Safety & Ventilation

$189 W, GST

Learning Objectives

Level II is a 6.5-hour program with the first two hours encompassing Level I. Level II is designed for any party that is supervising a ground disturbance, independently performing a ground disturbance, or issuing and receiving ground disturbance permits. The program ensures that Level II personnel are familiar with, and fully understand, all the regulations and variances involved when a ground disturbance takes place. The course is presented in a logical sequence – from the pre-planning stage to the actual dig – and highlights the “‘musts” compared to the “shoulds.”

Level II is the standardized program recognized by industry regulators. The prerequisite for this course is the successful completion of Level I. Participants learn how to clarify sources when searching for underground facilities, provide notification to the facility owner and receive owner notification. Participants gain an understanding of the necessary approvals/crossing agreements and regulations necessary before creating a ground disturbance. They learn to create a plot plan/site drawing, gain an understanding of line locating and learn about types of exposure. Participants will also learn how to do a back-fill inspection, as well as how to use permits and conduct pre-job meetings. Emergency response plans and what to do in case an underground facility is contacted are also covered.

Objectives are tested by written competency exam. Certification, valid for three years, is issued upon completion of objectives.

$204.75 W, GST

$68.25 W, GST

$183.75 W, GST

$131.25 W, GST

$173.25 W, GST

$162.75 W, GST

$126 W, GST

$68.25 W, GST

$68.25 W, GST

This course is the first level required in the steps to become a certified faller. In this program, you will learn the basics of chainsaw handling and operations and gain an understanding of personal and work site safety. This course is for anyone required to work with or around chainsaws at work or at home including trail or pipeline crews, seismic fallers and slashers, loggers, firefighters, arborists and more.

The program topics include:

Hazard assessment and control

Chainsaw inspection and maintenance

Chainsaw handling and operations

Safe limbing and bucking practices

The three day course includes one day of classroom instruction and two days of hands on training at a designated cutting site.

Upon successful completion of the course, you will receive a Chainsaw Competency Record Logbook and a wallet certificate that is valid for three years and are qualified to find work as a bucker (maximum six inches in diameter at breast height (DBH) trees.)