Black Ice Audio is Jolida - Jolida is Black Ice Audio

100 watts per channel of hi-performance sound. This amp has the power to drive 82 dB sensitivity speaker. It has drive and dynamics to make full symphonies or hard rock come to exciting life. But this amplifier has a gentle side as well and can deliver all the nuances of a delicate sound. Clear, robust bass with smooth highs and an image as large as your room in a value priced package. Remote volume control and an EZ-Biasing system make the operation and the maintenance of the JD 1000 BRC a simple matter.

Rated Output Power: 100 W per channel at 8 ohms, 25Hz to 70KHz

Maximum Power Output: 150 W per channel at 8 ohms, 1KHz

Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB

Bandwidth: 13Hz to 80kHz + 3dB; 0dB 100 W 1KHz

Distortion THD: Less than 1% at 100 W output, 28Hz to 15KHz

Circuit Type: Ultra Linear, Class AB1

Input Impedance: 100Kohms

Input Sensitivity: 500mV at 1KHz and 8 ohms for 100-watt output

Output Impedance: 4 ohms and 8 ohms

Negative Feedback: Less than 5 dB

Noise and Hum: 85dB below rated output

Tube Complement: 4 matched pairs (8) of 6CA7/EL34 power output; 2 pcs. 12AX7 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers.

Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option)

Dimensions: 17 1/8 inches wide by 16 inches deep by 9 7/16 inches high

Weight: 62 pounds net, approximately 74 pounds packaged

Warranty: Two year limited parts and labor. One year or 1000 hours whichever comes first on Jolida Tubes.

Bias Settings: 400 millivolts + 40 mV

Fuse: 110 - 120 VAC, 6.3 Amp Slo Blo ; 200 - 240 VAC, 3 Amp Slo Blo

The Fusion 801 is a makeover of a favorite model the JD 801BRC. We have kept all the well liked sound characteristics of the older model and improved the unit with an easy interchange of 6550 or El34 tubes, lower noise, increased clarity and a smooth presentation with midrange weight and enhanced 3 dimensionality. With its distinctive good looks and power the Fusion 801 can be a step up for your music pleasure.

Rated Output Power: 70 W per channel at 8 ohms, 25Hz to 60KHz with 6550 Tubes

60 W per channel at 8 ohms, 28Hz to 72KHz with EL 34 Tubes

Maximum Power Output: 95 W per channel at 8 ohms, 1KHz with 6550 Tubes

85 W per channel at 8 ohms, 1KHz with EL34 Tubes

Frequency Response: (at 1 watt into 8 ohms) 6Hz to 48KHz + 1dB; 0dB at 1KHz

Bandwidth: 14Hz to 70KHz + 3dB; 0dB = 70 W 1KHz, 8 ohms

Distortion THD + N: Less than 1% at 11V output, 49Hz to 20KHz, 8 ohms

Circuit Type: Ultra Linear, Class AB1

Input Impedance: Less than 100Kohms

Input Sensitivity: Max. 550mV at 1KHz for 70 watt output

Output Impedance: 4 ohms and 8 ohms

Negative Feedback: Less than 5 dB

Noise and Hum: 80 dB below rated output

Tube Complement: 2 pairs (4) of 6550/KT88 or EL34/6CA7 power output tubes; 1 pcs. 12AX7A preamplifier; 2 pcs. 6SN7GT power drivers

Power Requirements: 110V-120 VAC 60Hz 250 watts-standby, 500 watts maximum (220 VAC -240 VAC 50Hz option)

Dimensions: 18.25 inches (46.5 cm) wide by 13.5 inches (34.5 cm) deep by 8.5 inches (22 cm) high

Weight: 53 pounds (24 Kg) net, approximately 57 pounds (26 Kg) packaged

Fuse: For 110/120 VAC: 6.3 amp slo blo, for 220/240 VAC: 3.15 amp slo blow. Size: 5mm X 20mm

Combining a JD 302CRC and a JD 502CRC has resulted in the Fusion 3502 S. With a flick of a switch, you can set your amplifier up to operate 6550, KT 88, KT 120, KT 150 or EL34 Vacuum Tubes. The circuit has been redesigned and placed the same venerable steel chassis. Parts of the unit have been upgraded to include ESA clarity coupling caps, high speed diodes and DC voltage to the preamplifier tubes which lowers the noise floor and enhances clarity, air and dimensionality. Flexibility is not only the Vacuum Tubes, the Fusion 3502 has a bypass that allows the amp to be utilized as a power amp. You choose the tubes you want with your order. And for the best part, a clear, smooth sound with the 3 dimensional air that vacuum tubes can deliver.

Rated Output Power: 60 W per channel at 8 ohms, 25Hz to 60KHz with 6550 vacuum tubes

50 W per channel at 8 ohms, 28Hz to 72KHz with EL34 vacuum tubes

Maximum Power Output: 85 W per channel at 8 ohms, 1KHz with 6550 Tubes

75 W per channel at 8 ohms, 1KHz with EL34 Tubes

Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB

Bandwidth: 15Hz to 80KHz + 3dB; 0dB 60 W 1KHz

Distortion THD: Less than 1% at 20 V output, 28Hz to 15KHz

Circuit Type: Ultra Linear, Class AB

Input Impedance: 100Kohms

Input Sensitivity: 600mV at 1KHz for 50/60 watt output

Output Impedance: 4 ohms and 8 ohms

Negative Feedback: Less than 5 dB

Noise and Hum: 91 dB below rated output

Tube Complement: 4 pcs. EL34 or 6550 power output; 2 pcs. 12AX7A/ECC83 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers

Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option)

Dimensions: 17 inches (43cm) wide by 15 inches (38cm) deep by 7.5 inches (19 cm) high

Weight: 51 pounds (18 Kg) net, approximately 55 pounds (21 Kg) packaged

Bias Settings: 400 millivolts + 40 mV For EL 34s ot 500 millivolts + 50 mV for 6550s

Fuse: 110 - 120 VAC, 6.3 Amp slo Blo; 200 - 240 VAC, 3.15 Amp Slow Blow Size 5mm X 20mm

Small in stature, large in performance. This updated version of the popular JD 102BRC sees the addition of EZ-biasing and DC voltage to the filament of the vacuum tubes. With EZ biasing you turn the screw, the light goes on, the vacuum tube is biased. With DC volts the performance game is stepped up. The radical decrease in noise results in a fluid smooth clarity with a deep and wide soundstage. The elegant understated appearance works well with virtually any system and the small form factor makes the Fusion 1102 a great bookshelf amp. The Fusion 1102 has a big heart, delivering a surprising amount of juice even into difficult loads. Besides, the golden glow of those seven tubes will warm your heart, but not your room!

Maximum power Output: 25 W per channel at 8 ohms, 1KHz

Rated Output Power: 20 W per channel at 8 ohms, 26Hz to 50KHz

Frequency Response: (at 1 watt into 8 ohms) 7Hz to 95KHz + 1dB; 0dB at 1KHz

Bandwidth: 14Hz to 80KHz + 3dB; 0dB = 20 W 1KHz, 8 ohms

Distortion THD + N: Less than 1% at 15W output, 39Hz to 10KHz, 8 ohms

Circuit Type: Ultra Linear, Class AB1

Input Impedance: <= 250Kohms

Input Sensitivity: Max. 800mV for 20 watt output at 1KHz

Output Impedance: 4 ohms and 8 ohms

Negative Feedback: Less than 5 dB

Signal & Noise Ratio S/N: 90 dB below rated output from 10Hz to 200Khz

Tube Complement: 4 pieces Electro Harmonix EL84 power output tubes; 2 pcs. Electro Harmonix 12AT7A driver tubes, 1 pc. Tung Sol 12AX7 pre-amplifier tubes.

Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, (220-240 VAC 50Hz option.

Bias Settings: 200 millivolts +/- 20 millivolts

Dimensions: 12 inches wide by 8 inches deep by 5 inches high.

Weight: 27 pounds net, approximately 31 pounds packaged

Fuse: For 110/120 VAC: 4 amp slow blo, for 220/240 VAC: 3.15 amp slow blo, Size: 5mm X 20mm

Construction Details and Features:

Fully Integrated Stereo Amplifier: Input 800mV driving 20 watts, maximum 25 watts output.

EZ biasing: Turn the panel screw, the light goes on, the tube is biased.

Remote Control: Volume up and down, mute.

Multiple Inputs: DAC, DVR, CD, Aux, and a mini jack input on the front panel.

Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design. Secondary can be configured for a 4 ohm or 8 ohm load.

Top Panel Bias Testing Terminals with Bias Adjustment Controls.

State of the Art Components: Alps potentiometer, Gold plated RCA input jacks, gold plated five way speaker connectors.

Combines the best of two worlds, a tube pre-amp with a solid state power amplifier. A smooth silky sound with pace and bass at an affordable price and the convenience of remote control.

Rated Output Power: 100 W per channel at 8 ohms, 22Hz to 19KHz

180 W per channel at 4 ohms 22Hz to 10KHz

Frequency Response: (at 1 watt into 8 ohms) 5Hz to 100KHz + 1dB

Bandwidth: 22Hz to 19kHz + 3dB; 0dB 100 W 1KHz

Distortion THD: Less than 0.1% at 100 W output, 22Hz to 18KHz

Input Impedance: 47Kohms

Input Sensitivity: 500mV at 1KHz and 8 ohms for 100 watt output

Noise and Hum: 90dB below rated output

Tube Complement: 2 pcs. 12AX7 for the preamplifier

Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220VAC 50Hz option)

Dimensions: 17 inches wide by 13 inches deep by 4 inches high

Weight: 32 pounds net, approximately 33 pounds packaged

Warranty: 18 months limited parts and labor. Six months or 1000 hours whichever comes first on Jolida Tubes.

Fuse: 110 – 120 VAC, 6.3 Amp Slo Blo; 200 – 240 VAC, 3.15 Amp Slo Blo

Who says good things don’t come in small packages. Combines the best of two worlds, a tube pre-amp with a solid state power amplifier with remote control. A smooth silky sound with pace, bass and power at an affordable price. Available in Black or Silver finish.

Rated Output Power: 30 W per channel at 8 ohms, 22Hz to 20KHz

55 W per channel at 4 ohms, 22Hz to 20KHz

Frequency Response: (at 1 watt into 8 ohms) 5Hz to 100KHz + 1dB

Bandwidth: 22Hz to 20kHz + 3dB; 0dB 30 W 1KHz

Distortion THD: Less than 0.1% at 30 W output, 25Hz to 18KHz

Input Impedance: 47Kohms

Input Sensitivity: 400mV at 1KHz and 8 ohms for 30 watt output

Noise and Hum: 90dB below rated output

Tube Complement: 2 pcs. 12AX7 for the preamplifier

Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 250 watts maximum (220 VAC 50Hz option)

Dimensions: 7 inches wide by 6 inches deep by 4 inches high

Weight: 8 pounds (3.65 Kg) net, approximately 11 pounds (5 Kg) packaged

Warranty: 18 months limited parts and labor. Six months or 1000 hours whichever comes first on Jolida Tubes.

Fuse: 110 – 120 VAC, 1 Amp Fast Blo; 200 – 240 VAC, 0.5 Amp Fast Blo

Construction Details and Features:

o Fully Integrated Stereo Amplifier: Input 400mV driving 30 watts

Multiple Inputs: Front mounted selector switch - Input, Tuner, DVD, CD, and Aux. (for TV, VCR or Computer|).

State of the Art Components: ALPS audio potentiometer, gold plated RCA input jacks, and front panel minjack input.

Remote Control: Volume and mute

State of the Art Components: ALPS audio potentiometer, gold plated RCA input jacks.

Low Feedback Design: Only 5 dB

Modern styling and tube sound in an integrated amplifier designed for the entry-Fi market. Versatile is the word that can be used for this amplifier. It has a price and sound that competes with solid state. The unit can be matched with a large variety of speakers and CD players. Setting up is simple, hook up a CD and two speakers and you have a music system that is perfect for your home, apartment, office, den or dorm. Now the enjoyment begins, the liquid, warm precise sound of how music should be listened to. Available in Black or Silver.

Rated Output Power: 40 W per channel at 8 ohms, 30Hz to 80KHz

Maximum Power Output: 60 W per channel at 8 ohms, 1KHz

Frequency Response: (at 1 watt into 8 ohms) 7Hz to 140KHz + 3dB; 0dB at 1KHz

Bandwidth: 17Hz to 140KHz + 3dB; 0dB = 40 W 1KHz, 8 ohms

Distortion THD + N: Less than 1% at 30W output, 40Hz to 14KHz, 8 ohms

Circuit Type: Ultra Linear, Class AB1

Input Impedance: 100Kohms

Input Sensitivity: Max. 350mV at 1KHz for 40 watt output

Output Impedance: 4 ohms and 8 ohms

Negative Feedback: Less than 9 dB

Noise and Hum: 80dB below rated output.

Tube Complement: 2 matched pairs (4) of 6CA7/EL34 power output; 2 pcs. 12AX7A pre-amplifier, 2 pcs. 12AT7 power drivers.

Power Requirements: 110V-120 VAC 60Hz 120 watts-standby, 300 watts maximum (220 VAC 50Hz option).

Dimensions: 12.5 inches (30 cm) wide by 12 inches (31 cm) deep by 8.25 inches (21 cm) high.

Weight: 32 pounds (13 Kg) net, approximately 38 pounds (15 Kg) packaged.

Warranty: One year limited parts and labor. Six months or 500 hours whichever comes first on Jolida Tubes.

Bias Settings: 400 millivolts + 50 mV

Fuse: 110-120 VAC, 6.3 Fast Blo; 200-240 VAC, 3 Amp Fast Blo

Construction Details and Features:

Fully Integrated Stereo Amplifier: Input 350mV driving 40 watts, maximum 50 watts output.

Multiple Inputs: Front mounted selector switch-INPUT, TUNER,DVD, CD, and Aux (for TV, VCR or computer)

Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design. Secondary can be configured for a 4 ohm or 8 ohm load.

Top panel bias testing terminal with bias adjustment controls.

State of the Art Components: ALPS or Panasonic audio potentiometer, gold plated RCA input jacks, gold plated five way speaker connectors.

Low Feedback Design: Only 9 dB

A tube preamplifier for the discriminating listener. The unit provides a clean signal to the most demanding and transparent power amplifiers. At a later date, if your want to upgrade, it can be done. You can add bybee rails, Doulan capacitors, Clarity capacitors, naked Z resistors and even Ultra pure copper cast wire. Call us and we can discuss how we can configure the best fit for your system.

Max Output voltage: 20 dB

Voltage Gain: 30 V

Frequency Response: 5Hz to 110KHz, 10 V

Distortion THD: Less than .02%; 1 KHz, 10 V

SNR: Less than 100 dB

Input Impedance: 100Kohms

Output Impedance: 600 ohms

Weight: 28 pounds

Size: 17 inches W X 13 inches D X 4.5 inches H

Tube Complement: 2 pcs. 12AX7; 2 pcs. 12AT7 Premium Tungsol

Warranty: 18 months with 6 months on the Vacuum tubes

Construction Details and Features:

Full Tube Pre-amplifier

Multiple outputs: Fixed out, XLR out, RCA out.

Multiple Inputs: Front mounted selector switch and mini jack, with a pair of XLR and RCA inputs. Also includes a bypass input.

Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design

State of the Art Components: ALPS audio potentiometer, gold plated RCA input and output jacks. Includes custom made polypropylene capacitors, ESA Clarity Caps and Hexfred diodes.

All Metal Remote control

An active preamplifier with a full DAC and Bluetooth wireless. The DAC has a heart of glass and no solid state op amps in the signal path. This unit will maintain the purity of your digital sound with the latest in chip technology, galvanic isolation, and a circuit design giving you the smooth and rich analog sound only vacuum tubes can deliver. With bluetooth wireless your music is only a few clicks away from your smart phone or computer.

Max Output voltage: 2.8 V

Voltage Gain: 10 dB

Frequency Response: 20Hz – KHz, (+/- 1 dB)

SNR: > 100 dB

Distortion THD: Less than .02%

Input Impedance: 100Kohms

Output Impedance: 47 Kohms

Tube Complement: 2 pcs. 12AX7

Power: 110 VAC, fuse 5 x 20 mm 1 amp slo blow

220 – 240 VAC, fuse 5 x 20 mm 0.5 amp slo blow

Power consumption: 15 w

Size: 17 in. (W) x 13 in. (D) x 2.5 in. (H)

Box Size: 20 in. (W) x 23 in. (D) x 10 in. (H)

Weight: 14 lbs., 18 lbs. Boxed

Warranty: One year parts and labor, six months on vacuum tubes

DAC Specifications:

USB: 24/96 up sampling to 192 Hz

Toslink and coaxial: 24/192HzD

Galvanic Isolation: ADuM 1250 chips

Asynchronous Burr Brown Chip AD1896

DAC Chip: PCM 1798

All signal inputs are isolated

DAC chip directly transmits analog signal to SRPP Tubes

Bluetooth Frequency: 2.4 G

Bluetooth V2.1 + EDR , Aptx codec

Bluetooth maximum reception distance is 35 feet.

Need a low cost vacuum tube preamplifier? The JD 5T might fill the bill. With a slim profile, this pre can provide the true tube sound that may audio listeners look for. Available in Silver and Black.

Max Output voltage: 7 V

Voltage Gain: 10 dB

Frequency Response: 10Hz – 70KHz, (+/- 1 dB)

SNR: > 100 dB

Distortion THD: Less than .02%

Input Impedance: 100Kohms

Output Impedance: 600ohms

Tube Complement: 2 pcs. 12AX7

Size: 17 in. (W) x 13 in. (D) x 2 in. (H)

Weight: 11 lbs., 13 lbs. Boxed

Construction Details and Features:

Multiple Inputs: Tuner, DVD, CD, and Aux Two RCA Outputs.

State of the Art Components: High quality Alps blue potentiometer, gold plated RCA input jacks, R core power supply.

Remote Control has four functions: Standby, V+, V-, and Mute.

Low profile full body allows the unit to act as a base for your amplifier or turntable.

No need to lose another shelf for a component.

If vinyl is a source of enjoyment, then the JD9II is a versatile and easy to use tube unit that is sure to enhance your sound. Based on an earlier circuit we have improved the unit with a larger power supply, the addition a a robust voltage regulator, upgrade output capacitors and changes to the resistor arrays. With dim adjustments and two levels of output, you can easily configure the unit into your system, and then the fun begins.

Frequency Response: 5Hz to 110KHz, (+/- 1 dB)

SNR: > 100 dB

Distortion THD: Less than .01%

Input Impedance: 100Kohms

Output Impedance: 600 ohms

Phono Stage:

MM: 60 dB, 5 mV

MC High: 75 dB, 0.5 mV – 1.5 mV

MC Low: 85 dB, 0.25 mV – 0.5 mV

Input Resistance: 100 ohm, 300 Ohm, 1Kohm, 47Kohm

Input Capacitance 47 PF, 100PF, 150PF, 220PF

Tube Complement: 2 pcs. 12AX7

Size: 17 in. (W) x 13 in. (D) x 2 in. (H)

Weight: 10 lbs., 14 lbs. Boxed

Warranty: One year parts and labor, 3 months on tubes

Construction Details and Features:

Phono pre-amplifier that will handle MM, MC and Dynamic head cartridges.

Lowest Rated sensitivity at .25 mV – 85 dB.

Low noise -57 dB

Two Outputs RIAA, Line stage.

Adjustable settings for cartridge type

State of the Art Components: Gold plated RCA input jacks.

R Transformer and Heavy duty Voltage Regulator

Low profile full body allows the unit to act as a base for your amplifier or turntable.

No need to lose another shelf for a component.

Tube Output

100 watts per channel of hi-performance sound. This amp has the power to drive 82 dB sensitivity speaker. It has drive and dynamics to make full symphonies or hard rock come to exciting life. But this amplifier has a gentle side as well and can deliver all the nuances of a delicate sound. Clear, robust bass with smooth highs and an image as large as your room in a value priced package. The EZ-Biasing system make the operation and the maintenance of the JD 1000 BRC a simple matter.

Rated Output Power: 100 W per channel at 8 ohms, 25Hz to 70KHz

Maximum Power Output: 150 W per channel at 8 ohms, 1KHz

Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB

Bandwidth: 13Hz to 80kHz + 3dB; 0dB 100 W 1KHz

Distortion THD: Less than 1% at 100 W output, 28Hz to 15KHz

Circuit Type: Ultra Linear, Class AB1

Input Impedance: 100Kohms

Input Sensitivity: 2 V at 1KHz and 8 ohms for 100-watt output

Output Impedance: 4 ohms and 8 ohms

Negative Feedback: Less than 5 dB

Noise and Hum: 85dB below rated output

Tube Complement: 4 pairs (8) of 6CA7/EL34 power output; 2 pcs. 12AX7 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers.

Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option)

Dimensions: 17 1/8 inches wide by 16 inches deep by 9 7/16 inches high

Weight: 70 pounds net, approximately 75 pounds packaged

Warranty: Two year limited parts and labor. One year or 1000 hours whichever comes first on Jolida Tubes.

Bias Settings: 400 millivolts + 40 mV

Fuse: 110 - 120 VAC, 6.3 Amp Slo Blow; 200 - 240 VAC, 3 Amp Slo Blow

Power Amplifier

Technical Specifications Fusion 3502 P

Maximum Power Output: 85 W per channel at 8 ohms, 1KHz with 6550 Tubes

75 W per channel at 8 ohms, 1KHz with EL34 Tubes

Rated Output Power: 60 W per channel at 8 ohms, 25Hz to 60KHz with 6550 Tubes

50 W per channel at 8 ohms, 28Hz to 72KHz with EL 34 Tubes

Frequency Response: (at 1 watt into 8 ohms) 8Hz to 130KHz + 1dB

Bandwidth: 15Hz to 80KHz + 3dB; 0dB 60 W 1KHz

Distortion THD: Less than 1% at 20 V output, 28Hz to 15KHz

Circuit Type: Ultra Linear, Class AB

Input Impedance: 100Kohms

Input Sensitivity: 2 V at 1KHz for 60 or 50 watt output

Output Impedance: 4 ohms and 8 ohms

Negative Feedback: Less than 5 dB

Noise and Hum: 90dB below rated output

Tube Complement: 4 pieces of 6550/KT88 or 4 pieces of EL34 power outputTubes; 2 pcs. 12AX7A/ECC83 pre-amplifier; 2 pcs. 12AT7/ECC81 power drivers.

Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option)

Dimensions: 17 inches (43cm) wide by 15 inches (38cm) deep by 7.5 inches (19 cm) high

Weight: 50 pounds (18 Kg) net, approximately 55 pounds (21 Kg) packaged

Warranty: Two year limited parts and labor. One year or 3000 hours whichever comes first on Tubes.

Bias Settings: 500 millivolts + 50 mV for 6550s, or 400 millivolts + 40 mV for EL34s

Fuse: 110 - 120 VAC, 6.3 Amp slo blo; 200 - 240 VAC, 3 Amp slo blo Size 5mm X 20mm

Construction Details and Features:

Stereo Power Amplifier: Input 2 V driving 60 watts (6550 tubes) or 50 watts (EL34 tubes) output, maximum 90 watts (6550 tubes) or 80 watts (El34 tubes) output.

Multiple Inputs: RCA and XLR inputs.

Custom Wound Audio Transformers with a core of German grain oriented silicon steel. 15th generation proprietary design. Secondary can be configured for a 4 ohm or 8 ohm load.

Top panel bias testing terminal with bias adjustment controls plus EZ-biasing.

State of the Art Components: Hexfred Diodes, carbon composite grid resistors, custom coupling cap., Alps blue potentiometer.

Low Feedback Design: Only 3 dB

A power amplifier with a tube buffer stage to clean up the input signals coming in. Speed, dynamics, power and a large soundstage are the audio characteristics of this value package. A power amplifier that will not disappoint.

Rated Output Power: 100 W per channel at 8 ohms, 22Hz to 19KHz

180 W per channel at 4 ohms 22Hz to 10KHz

Frequency Response: (at 1 watt into 8 ohms) 10Hz to 35KHz + 1dB

Bandwidth: 22Hz to 19kHz + 3dB; 0dB 100 W 1KHz

Distortion THD: Less than 0.1% at 100 W output, 22Hz to 18KHz

Input Impedance: 47Kohms

Input Sensitivity: 2V at 1KHz and 8 ohms for 100-watt output

Noise and Hum: 90dB below rated output

Tube Complement: 2 pcs. 12AX7 for the preamplifier

Power Requirements: 110V-120 VAC 60Hz 180 watts-standby, 450 watts maximum (220 VAC 50Hz option)

Dimensions: 17 inches wide by 13 inches deep by 4 inches high

Weight: 32 pounds net, approximately 33 pounds packaged

Warranty: 18 months limited parts and labor. Six months or 1000 hours whichever comes first on Jolida Tubes.

Fuse: 110 – 120 VAC, 6.3 Amp slo Blow; 200 – 240 VAC, 3.15 Amp slo Blow

Construction Details and Features:

Hybrid Stereo Power Amplifier: Input 2 V driving 100 watts

Multiple Inputs: RCA or XLR.

State of the Art Components: ALPS audio potentiometer, gold plated RCA input jacks, audiophile grade ceramic composite grid resistors, high speed soft recovery diodes, poly coupling capacitors.

E-Z biasing system: Hi-performance, minimal effort.

Low Feedback Design: Only 5 dB

Comes in Black or Silver

Output Level: 0 V to 2.3V (±1dB, 47K ohms) (SIN SIGNAL 0dB SPDIF IN)

Frequency Response: 20-20 KHz (±0.5dB)

Bandwidth: 10Hz to 70kHz + 1dB

SNR: >90dB (20Hz-20kHz)

Dynamic Range: 126 dB

Distortion THD: Less than 0.01% (1kHz)

Headphone Impedance: 30 Ohms

Circuit Type: Ultra Linear, Class AB

Tube Complement: 2 pcs. 12AX7 pre-amplifier

Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option)

Dimensions: 8 inches wide by 7 inches deep by 3 inches high

Weight: 7.5 lbs net, approximately 10 lbs. packaged

Warranty: 6 month limited parts and labor. Three months on the tubes

Fuse: 110 - 120 VAC, 1 Amp slo Blo; 200 - 240 VAC, .5 Amp Slo Blo

Construction Details and Features:

Amplification of Analog Signal done exclusively via Vacuum tubes.

PCM: 32Bit/384KHz

DSD: DSD 64/DSD 128

Asynchronous Burr Brown Chip AD1896

DAC Chip: PCM 1795

R Style Transformer

State of the Art Components:

A DAC with a heart of glass and no solid state op amps in the signal path. This unit will maintain the purity of your digital sound with the latest in chip technology, galvanic isolation and circuit design giving you the smooth and rich analog sound only vacuum tubes can deliver.

Output Level: 0 V to 2.3V (±1dB, 47K ohms)(SIN SIGNAL 0dB SPDIF IN)

Frequency Response: 20-20 KHz （±0.5dB）

Bandwidth: 10Hz to 70kHz + 1dB

SNR ＞90dB ( 20Hz-20kHz)

Dynamic Range 126 dB

Distortion THD: Less than 0.01% (1kHz)

Headphone Impedance 30 Ohms

Circuit Type: Ultra Linear, Class AB

Tube Complement: 2 pcs. 12AX7 pre-amplifier

Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option)

Dimensions: 8 inches wide by 7 inches deep by 3 inches high

Weight: 7.5 lbs net, approximately 10 lbs.packaged

Warranty: 6 month limited parts and labor. Three months on the tubes

Fuse: 110 - 120 VAC, 1 Amp slo Blo; 200 - 240 VAC, .5 Amp Slo Blo

Construction Details and Features:

USB: 24/96 up sampling to 192 Hz

Toslink and coaxial: 24/192Hz

Galvanic Isolation: ADuM 1250 chips

Asynchronous Burr Brown Chip AD1896

Volume control and headphone jack

DAC Chip: PCM 1798

R Style Transformer

State the Art Components: capacitor filters, gold plated RCA jacks,

A DAC with a heart of glass and no solid state op amps in the signal path. This unit will maintain the purity of your digital sound with the latest in chip technology, galvanic isolation, and a circuit design giving you the smooth and rich analog sound only vacuum tubes can deliver. With Bluetooth wireless your music is only a few clicks away from your smart phone or computer.

Output Level: 0 V to 2.3V (±1dB, 47K ohms)(SIN SIGNAL 0dB SPDIF IN)

Frequency Response: 20-20 KHz （±0.5dB）

Bandwidth: 10Hz to 70kHz + 1dB

SNR ＞90dB ( 20Hz-20kHz)

Dynamic Range 126 dB

Distortion THD: Less than 0.01% (1kHz)

Headphone Impedance 30 Ohms

Circuit Type: UltraLinear, Class AB

Tube Complement: 2 pcs. 12AX7 pre-amplifier

Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 240 watts maximum (220 VAC 50Hz option)

Dimensions: 8 inches wide by 7 inches deep by 3 inches high

Weight: 7.5 lbs net, approximately 10 lbs.packaged

Warranty: 6 month limited parts and labor. Three months on the tubes

Fuse: 110 - 120 VAC, 1 Amp slo Blo; 200 - 240 VAC, .5 Amp Slo Blo

Two 12AX7A vacuum tubes driving a pair of headphones, what could be better. Air, openness and richness even at low playing volumes. Adjustable bass and loudness switches add flexibility to the sound you want. Try out how vacuum tubes can bring the a new natural to your ears.

Rated Output Power: 100 mW at a load of 32 ohms

Frequency Response: (at 1 watt into 8 ohms) 5Hz to 100KHz + 1dB

Bandwidth: 20Hz to 100kHz + 1dB

Distortion THD: Less than 0.1% at 100mW output, 32 ohm load

Input Impedance: 32 ohms

Output Impedance: 32 to 300 ohms

Input Sensitivity: 450mV

SNR: 85dB

Tube Complement: 2 pcs. 12AX7

Power Requirements: 110V-120 VAC 60Hz, 220 VAC 50Hz option

Dimensions: 7 inches wide by 6 inches deep by 4 inches high

Weight: 8 pounds (3.65 Kg) net, approximately 11 pounds (5 Kg) packaged

Fuse: 110 – 120 VAC, 1 Amp Fast Blo; 200 – 240 VAC, 0.5 Amp Fast Blow

Construction Details and Features:

Fully Integrated Vacuum Tube Headphone Amplifier: Input 450mV driving 100 mW.

State of the Art Components: ALPS audio potentiometer, two sets gold plated RCA input jacks, and front panel minijack input.

Bass and Treble boost controls

Smooth, rich and holographic sound from a 7 inch cube with a removable safety glass cover. A small but feature laden integrated vacuum tube amplifier, the unit has automatic biasing, can easily push 89 dB speakers, remote control, inputs of two RCA sets and one mini-jack with and 4 and 8 ohm speaker posts. Yes, it does come with the blue tube lights.

Rated Output Power: 10 W per channel at 8 ohms, 26Hz to 50KHz

Frequency Response: (at 1 watt into 8 ohms) 17Hz to 37KHz + 1dB; 0dB at 1KHz

Bandwidth: 14Hz to 50KHz + 3dB; 0dB = 10 W 1KHz, 8 ohms

Distortion THD + N: Less than 1% at 10 W output, 39Hz to 10KHz, 8 ohms

Circuit Type: Ultra Linear, Class AB1

Input Impedance: = or < 100Kohms

Input Sensitivity: Max. 670 mV for 10 watt output at 1KHz

Output Impedance: 4 ohms and 8 ohms

Negative Feedback: Less than 3 dB

Signal & Noise Ratio S/N: 81dB below rated output from 10Hz to 20Khz .

Tube Complement: 2 matched pairs (4) of EL84 power output; 2 pcs. 12AX7 pre-amplifier.

Power Requirements: 110V-120 VAC 60Hz or 220-240 VAC 50Hz

Bias Settings: Self biasing

Dimensions: 8 inches wide by 7 inches deep by 7 inches high.

Weight: 12 pounds net, approximately 16 pounds packaged.

Fuse: For 110/120 VAC: 2 amp fast blo, for 220/240 VAC: 1 amp fast blo, Size: 5mm X 20mm

Pure tube, no op amps in a DAC that has a transport for CD playing as well. With a fully balanced circuit and six tubes in the signal path, this player will bring definition in clarity without any loss of smoothness. Transparency and air without any sacrifice of richness. Parts are of first grade quality and we have taken the worry out of chip obsolescence; should we upgrade the chips, it will be just a matter of changing the board. Time to see what tubes and a Hi-performance circuit will have on your digital music.

Frequency Response: 20-20KHz ± 0.5dB + 0.5dB

S/N Signal to Noise Ratio: > 98dB

THD + N Distortion: ≤0.02% （Balanced signal 1KHz

Channel Separation: > 96dB (1KHz)

Analog Output Signal Balanced XLR, Unbalanced RCA

Line Output Voltage: Balanced signal output 5.0V, 47Kohms

Line Output Voltage: Unbalanced 2.5V, 47Kohms

Digital Output: 0.5Vpp, 75 ohms

Tubes : 6 pcs. 12AX7 *2,12AT7*2,12AU7*2

Power: 110V or 220V AC 50Hz/60Hz

Power Consumption: 30 watts

Fuse: 1.0 amp fast blo (size 5mm X 20mm) for 110/120 VAC --- 0.5 amp fast blo for 220/240 VAC

Size: 17 in. wide by 12 in. deep and 3.5 in. high

Weight: 28 pounds

Warranty: 12 months on the chassis, 6 months on the vacuum tubes. Parts and labor

Stereo configured in Dual MonoTube Circuit (Fully Balanced Circuit) XLR and RCA outs

Full aluminum chassis

Dac Board can be interchanged with future upgraded boards

Upgraded part such as ESA clarity caps, ultra fine cast wire in the signal path.

Full Metal Remote Control

Phillips Transport

Input Signal CD Disc, USB, Coaxial or Toslink

In terms of function, the DAC Transport can operate as a stand alone DAC with USB, Toslink and Coaxial inputs.

Digital Output signal toslink or Coaxial

2 pieces premium Tungsol 12AU7 preamplifier vacuum tubes.

2 pieces premium Tungsol 12AT7 driver vacuum tubes

2 pieces premium Tungsol 12AX7 driver vacuum tubes

DAC Specifications

Main IC Chip USB Power Isolation ADMU4160

USB Receiver TE7022 24BIT/96K

SPDIF Receiver CS8416 24BIT/192K Asynchronous Sampling AD1896 24BIT/192K

D/A Convert PCM 1794 24BIT/192K

Sound Stage Expander

Frequency Response: 2 Hz to 200 KHz - 3dB

Distortion THD: Less than 1% at 20 V output, 28Hz to 15KHz

Tube Complement: 1 pc. 12AU7

Power Requirements: 110V-120 VAC 60Hz 180 (220 VAC 50Hz option)

Dimensions: 9.25 inches (24 cm) wide by 5,75 inches (14.5cm) deep by 2.5 inches (6.5 cm) high

Weight: 4.75 pounds (2.1 Kg) net, approximately 6 pounds packaged

Warranty: One year limited parts and labor. Six months or 500 hours whichever comes first on Jolida Tube.

Fuse: 110 - 120 VAC, .5 Amp slo Blo; 200 - 240 VAC, .25 Amp slo Blo Size 5mm X

Power Requirements: 110V-120 VAC 60Hz 90 watts, 240 watts maximum (220 VAC 50Hz option)

Crosstalk Reducer

Gain: Unity

Input Z: 71K

Output Z: 400 ohms

SNR: > then 90DB "A weighted"

Distortion THD: Less than 0.25% (1kHz)

Perfect Square wave response, no ringing or overshoot.

Frequency response DC to 200KHZ +0 -3DB

Phase inverting

Distortion THD: Less than 0.25% (1kHz)

Power Requirements: 110V-120 VAC 60Hz 90 watts, 240 watts maximum (220 VAC 50Hz option)

Dimensions: 8 inches wide by 7 inches deep by 3 inches high

Weight: 2 lbs net, approximately 3.5 lbs. packaged

Fuse: 110 - 120 VAC, 0.1 Amp slo Blo; 200 - 240 VAC, 0.05 Amp Slo Blo